Morsettitalia 43509/12 Din Rail Terminal Insulated Jumper 12 Pole
Morsettitalia 43509/12 Din Rail Terminal Insulated Jumper 12 Pole
Morsettitalia 43509/12 Din Rail Terminal Insulated Jumper 12 Pole
Mounting: DIN Rail 35
Connection: Screw standard. Optional cage clamp or hybrid connection.
Cable: 0.5mm to 4mm (#24-10AWG) 2 2
Optional Components: Mini fuse module, non-fused terminal block modules and Euro Omega DIN 35 Rails.
Jumpers: Jumpers can be used to share power from one input cable across multiple fuse modules and are supplied in strips of 12. They can be cut using the ratchet jumper cutting tool #43517. ^One x 3.0mm or two x 1.5mm separator / end plates are required between each fuse module when using jumpers.
Fuse Modules: Feature 1 x open and 1x closed wall so only 1 x end plate is required to finish either a single module or multiple modules. Fuse modules accept both auto blade fuses and auto blade circuit breakers. Cartridge fuses can be fitted by purchasing the appropriate fuse holder module which plugs directly into the fuse module.
Fuse Holders: *One x 1.5mm separator / end plate is required between each adjoining fuse module.
End Stop: These modules feature a screw which tightens onto the DIN rail to stop modules sliding along the rail.
Notes: Non fused DIN rail terminal blocks are also available.