Littelfuse 04980933 Bussed 3 Position Midi Fuse Block 200A 58VDC IP69K

Littelfuse 04980933 Bussed 3 Position Midi Fuse Block 200A 58VDC IP69K

The Littelfuse MDB series is an internally bussed, water-proof and dust-proof fuse holder developed for high current loads, and harsh conditions.

The unit is well-suited for near-the-battery applications and can be mounted in exposed locations to fit your design.

A single input power cable connects to a 3 pole busbar to feed either 2 or 3 Midi fuse protected output cables.

In addition, 2 spare Midi fuses can be fitted to the inside of the cover using the included screws.

Description:

PDM Module Kit (includes cover, base, seals & hardware).

Module kit does not include ring terminals or fuses. Module kit includes;

• 1 x MDB base with tethered cover & seal.

• 1 x busbar to power 3 fuses from a single input cable.

• 6 x nuts to secure Midi fuses.

• 6 x cable seals of assorted sizes.

• 1 x cavity plug (required if you only install 2 x Midi fuses).

• 2 x cable seal caps to secure cable seals into unit.

• 4 x screws to secure 2 spare fuses to inside cover.

• 1 x instruction sheet.

Specs:

Voltage: 58VDC max

Maximum Total Current: 200A

Wire Size: 5mm

(input cable), 6 to 16m

Temperature Rating: -40°C to + 5°C.

UL 94-V0

Ingress Protection Rating: IP67, IP69K when cover, cable seals, & caps are installed. Cables must not exceed the minimum bend radius advised in the included instruction sheet to ensure seal integrity.

Cavity Plug: Included cavity plug must be fitted if using only 2 x Midi fuses.

Mounting: Surface mount using 3 fixing holes (M6 or 0.25")

Suit Fuse: Midi fuses.

Pack Size: 1