Prolec PDMKIT-664T PDM Kit for 10 Fuses or Breakers & 5 Relays with Internal Relay Bus

• RTMRBlock (15305-6) with tall cover
• 3 x Mini 280 relays or 5 x Micro 280 relays
• 10 x Mini fuses / circuit breakers
• No bussing for fuses
• All relays bussed to coil pin 86

This kit includes:

• RTMR Fuse Block & Cover
• Mounting Bracket
• 55 x Terminals in assorted sizes
• 55 x Cable Seals in assorted sizes
• 20 x Cavity Plugs
• Circuit Identificaiton Label
• Instruction Book (Download via QR Code)

The Rear Terminal Minifuse and Relay unit is designed to provide efficient power distribution in a rugged compact form, suitable for applications in marine, construction, agriculture, heavy trucking, and specialty vehicle industries.

Bussmann RTMR blocks are rugged, compact and provide a high level of ingress protection. To ensure the product performs as designed, please install and use the block in accordance with the following requirements.

Input Studs: Some blocks feature one or more input studs which connect to the internal buss. Each stud has a maximum power rating of 80A. It is recommended that cables be a minimum gauge of #10AWGandfitted with external fuse protection (see pages 18-19). Stud caps should befitted after cables have been installed.

Terminal Rating:30Amax per terminal.

Terminal Wire Size:#22 - #12AWG/ 0.35mm² - 3mm².

Ingress Protection Rating: IP66-IEC60529. To achieve this rating you mustfit cable seals to all cables and cavity plugs must be inserted into all empty cavities at the rear of the block. Cover must also be correctlyfitted to the unit. Ensure when mounting the unit, all cables exiting the rear of the unit are not bent too tightly to ensure the cable seals will provide the correct seal.

Temperature Rating:-40°C to +125°C (RTMRblock only).

PRODUCT INFORMATION